Taxa Outdoors Cricket 2019, Руководство пользователя

Страница: 7 / 65

C RIC K E T
®
www.taxaoutdoors.com
1830 west 15th street houston, tx 77008 usa (rev.11292018) 7
HITCHING
Our trailers require a 2” diameter hitch ball. Use of any other hitch ball diameter size will create an extremely dangerous condition that can
result in separation of the coupler and ball, and/or hitch ball failure. Other than this crucial 2” diameter requirement, there are numerous
trailer hitches and hitching components available to you for your trailer. Be sure to consult your tow vehicle manufacturer for hitch and/or
hitch assembly alternatives.
pre- hitch/coupling/trip considerations and inspection …. be sure your hitch and tow vehicle are rated for the Gross Vehicle Weight Rating
(GVWR) of your trailer. Remember that the hitch load rating must be equal to or greater than the coupler load ( the hitch is attached to the
car, the coupler to the trailer). Be sure the hitch size matches the coupler size.
Examine all hitch components before hitching, looking for wear, corrosion, deformations, stripping and cracks. Replace worn, corroded or
cracked hitch components before coupling the trailer to the tow vehicle. Be sure the hitch components are tight and that the ball-locking
device works freely before coupling the trailer to the tow vehicle. Remember to also Inspect the safety chains. Be sure to correct any noted
problems or defects before towing the trailer.
Other Important Note: be sure to raise all trailer jacks and close the trailer fully before hitching (i.e. close all doors and windows and raise
the step ladder).
Your trailer is equipped with a 7-pin connector, which synchronizes the lights of your tow vehicle and trailer, and can connect their respective
braking systems. Although your trailer is equipped with electric brakes, you will need to separately purchase a brake controller for the trailer
electric brakes to operate. Electric brakes are not required in every State. However, we recommend that you use them and thus, that you
separately purchase a brake controller.
WARNING: THE PROPER SELECTION AND CONDITION OF THE COUPLER AND HITCH IS ESSENTIAL TO THE SAFE TOWING OF
YOUR TRAILER. A LOSS OF COUPLING MAY RESULT IN DEATH OR SERIOUS INJURY.
WARNING: AN IMPROPERLY COUPLED TRAILER CAN RESULT IN DEATH OR SERIOUS INJURY .
WARNING: USE OF A TOW VEHICLE WITH A TOWING CAPACITY LESS THAN THE LOAD RATING OF THE TRAILER CAN RESULT IN
LOSS OF CONTROL, AND MAY LEAD TO DEATH OR SERIOUS INJURY.
Hitching up your trailer will get easier with practice. The hitching steps described below are typical. However, we highly recommend that
you also consult the hitching and unhitching instructions associated with your particular tow vehicle and hitching configuration.
hitching steps and instructions :
(1) crank the tongue of the trailer jack until the hitch coupler is raised enough to clear the tow vehicle;
(2) back the tow vehicle to the trailer until the hitch ball is directly under the trailer coupler. The use of a backing aid mirror may be helpful,
especially if you are hitching alone;
(3) set the parking brake in the tow vehicle;