Taxa Outdoors Cricket 2019, Руководство пользователя

Страница: 32 / 65

C RIC K E T
®
www.taxaoutdoors.com
1830 west 15th street houston, tx 77008 usa (rev.11292018) 32
ELECTRICAL SYSTEM
Your Cricket CAMP or TREK’s trailer’s electrical system is a primarily a 12 Volt Direct Current (DC) system and has 120V AC outlets that
operate only when attached to shore power. This is explained as follows:
12V DC OVERVIEW
Your trailer 12 Volt system is powered by a 12V battery or batteries (
see “Battery” section). Most installed appliances, aside from air
conditioning and Hot Water heater operate fully with 12V power.
7-pin connector … use your 7 -pin connector plug to connect your tow vehicle and trailer electrical systems. This cord is located at the front
of your trailer and plugs into a receptacle provided in your tow vehicle’s hitch package. In addition to charging your trai ler battery while
driving, this connection powers your trailer lights and electric brakes (a separately purchased and installed brake controller in your tow
vehicle may supplement the basic “on/off” brake functionality of the trailer). BE SURE TO PLUG THE 7 PIN CONNECTOR WITH THE
PROPER HOLES AT TOP AND BOTTOM. FAILURE TO DO SO MAY DAMAGE YOUR TRAILER WIRING AND ELECTRIC BRAKE
SYSTEM.
We recommend disconnecting the 7 pin connector from the tow vehicle when camping
When hitching and unhitching, be sure to move the 7-pin connector cord so it does not get damaged by, for example, the hitch and/or pin
box. Do not allow the cord to drag on the ground and cover with a rag or soft cloth when not in use. Keep the connector clean and dry, and
follow manufacturer instructions for cleaning if necessary. See also “Hitching “ section for further discussion regarding yo ur 7-pin connector.
If you have a mounted air conditioning unit, it will operate only on external 120V power from a home, campground or a generator. There is
a dedicated 120V outlet located close to the air conditioner’s location. Important Note: you must refer to the manuals and other instructions
of any and all appliances, add-ons and/or accessories regarding their respective electrical requirements.
120V circuit breakers … 120V circuit breakers are located inside your converter/charger box , which is located on the drivers side rear of the
trailer interior beneath the berth. They control the circuit between the 120v inlet and the 12v power provided in the trailer. If your circuits
trip because of overload, reduce the load and reset the breaker.