USER INSTRUCTIONS• 5
27
Change battery pack
To change the battery pack, follow the steps described on the
following pages.
b
a
c
c
1.
Elevate the unit approximately 200mm.
2.
Extend the stabilisers (a) by pressing the
park mode button (see page 19) on control
panel.
3.
Remove the front covers (b) and store
them somewhere safe, they will need to be
reattached later in the process.
4.
Open the access hatch.
5.
Insert the power pack quick change support
legs (c) and make sure they are all fully
seated. The support legs are designed to
be installed in the correct orientation, the
chamber on the end of the leg should face
away from the fork members as shown in
the illustration.
6.
Place the unit on a flat surface and make
sure it is equally supported on all feet.
