1.
2.
SETTING THE TEMPERATURE
The handle on the right of the valve controls the water temperature. To adjust the temperature:
1.
Unscrew the handle arm (1) on the temperature handle (3) to reveal the handle grub screw (2). Using a
suitable allen key loosen the grub screw and carefully slide the handle off the thermostat spindle (5).
2.
Remove the handle stop (4) from the thermostat spindle (5).
3.
Rotate the thermostat handle (5) until the desired hot water temperature is reached. (TMV2 regulations
require a maximum temperature of no more than 44ºC)
4.
Replace the handle stop (4) with the stop lug positioned just to the right of the cartridge stop (6). See
diagram below.
5.
Replace the handle (3) back onto the thermostat spindle (5) and secure via the handle arm (2).
6.
Test to ensure the desired maximum temperature is reached.
OPERATING
Increase flow
decrease
temperature
Increase
temperature
decrease flow
+
-
4
5
6
7
3
2
1
KINETIC BOTTOM OUTLET BAR VALVE SHOWN
KINETIC BOTTOM OUTLET BAR VALVE SHOWN
