Taurus TF-RK2459, Руководство по сборке и эксплуатации

Страница: 13 / 28

12
13
10
11
12
13
1
1
3
4
5
5
8
8
8
8
9
9
11
12
13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
Step 1: Assembly of the Joint Tubes
1. Insert the four end caps (8) to the ends of both upright supports (1).
2. Assemble the left joint tube (3) to the right joint tube (4) with one fast pin (10).
3. Assemble the left joint tube (3) and right joint tube (4) to the upright supports (1) with two
reinforcement plates (5), four bolts (11), eight washers (12) and four lock nuts (13) in total.