Taurus TF-K22604, Руководство по сборке и эксплуатации

Страница: 12 / 40

Ergo-X
12
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the front and rear stabilizer
1. Mount the front stabilizer
(15) to the main frame (16)
with two flat washers (5)
and two bolts (3).
2. Mount the rear stabilizer (4)
to the main frame (16) with
two flat washers (5) and two
bolts (3).
3. Tighten the bolts.
Step 2: Assembly of the seat
1. Slide the vertical seat post (10) into the seat post
housing of the main frame (16).
2. Loosen and pull out the adjustment knob (9) and
fix the seat post (10) with the adjustment knob (9)
to the main frame (16).
⚠
CAUTION
Within the next step, make sure that the
adjustment knob (9) audibly engages into one of
the adjustment holes of the seat post (10).
3. Let the adjustment knob (9) snap back into
one of the adjustment holes and re-tighten the
adjustment knob (9).
4. Slide the seat post (12) on the vertical seat post (10)
and tighten the bolt (48).
5. Mount the seat (13) to the seat post (12) and tighten
the bolts under the seat.