6
Belt & Disc Sander
After Sales Support
TEL: 07 3188 2025
WEB:
helpdesk
@
duons
.
com
.
au
22 - Have your tool repaired by a qualified person
- This electric tool complies with the relevant safety rules. Repairs should only be carried
out by qualified persons using original spare parts, otherwise this may result in
considerable danger to the user.
Special safety instructions
The following points need to be checked:
•
Do the connecting voltage of the machine correspond with the mains voltage.
•
Are the mains lead and the mains plug in a good condition; strong, without ravels or damages.
•
For functional reasons the turning parts of this machine are not covered. Therefore it is of
•
utmost importance to be careful. Hold the workpiece firmly, to prevent it from slipping
from your hands. Never touch the sanding surfaces of a working machine with your hands.
Avoid the use of long extension cables.
•
If necessary, secure the sanding machine with screws.
•
Whenever using the machine
Check that the switch is NOT in the ‘ON/1’ position before connecting the machine to the
•
power supply.
Always keep the power cord out of the way of the tool’s moving parts.
•
immediately switch off the machine when:
The plug or power cord is defective or damaged.
•
The switch is defective.
•
You smell smoke or burning insulation
•
electrical safety
When using electric machines always observe the safety regulations applicable in your country
to reduce the risk of fire, electric shock and personal injury. Read the following safety
instructions and also the enclosed safety instructions.
Always check that the power supply corresponds to the voltage on the rating plate.
replacing cables or plugs
Immediately throw away old cables or plugs when they have been replaced by new ones. It is
dangerous to insert the plug of a loose cable in the wall outlet.
BGM6019 Ma 1112-13.indd 6
13-12-2011 08:44:46
