Taurus SelectaBell TF-ADB-55, Руководство по сборке и эксплуатации

Страница: 14 / 28

SelectaBell Dumbbell
14
1. Loosen the screws underneath the dumbbell tray and
push or pull the tray in the direction so that the weight
plates can correctly stay positioned in the dumbbell tray.
2. Re-tighten the screws.
Detached weight plates
Please make sure that the dumbbells are never dropped. In
case the dumbbell is accidentally dropped, the adjusting pin
can spring inwards, resulting in some weight plates detaching.
Carefully lift the dumbbell up and remove the detached
weight plates (use caution as the weight plates may fall). Place
the removed weight plates back on to the dumbbell tray.
In case the dumbbell is accidentally dropped, the
adjusting pin can spring outwards. Pull the adjusting
pin out and re-insert in the maximum weight (all
weight plates are attached) and place the dumbbell
back on to the dumbbell tray.
Additional weight plates
If you pull out an extra weight plate (a heavier
weight as set), it could be that the adjusting
pin isn’t correctly inserted in the slot.
Re-adjust the adjusting pin correctly. Then
lift and re-insert the dumbbell quickly 3 - 5
times.
Detached adjusting pin
In case the adjusting pin gets detached from the dumbbell,
loosen the screw on the underside of the grip, re-insert the
adjusting pin and re-tighten the screw.