Taurus SelectaBell TF-ADB-55, Руководство по сборке и эксплуатации

Страница: 13 / 28

1
2
3
4
5
6
7
SelectaBell Dumbbell
13
The weight plates are not correctly aligned
1. If the plates are not correctly aligned, the dumbbell is hard to adjust.
2. Check if there are any foreign objects (dirt/small objects) are in the dumbbell tray.
3. Choose the maximum weight of 55/55lbs and lift up the dumbbell 3 - 5 times.
4. Change the order of the outer weight plates.
5. Lift the grip up and lay it quickly back 3 - 5 times. Please make sure the weight plate is fully re-
inserted and touches the bottom of the dumbbell tray.
6. Push both sides of the dumbbell tightly together 3 - 5 times.
7. Pull out the adjusting pin and slide it back and forth 3 - 5
times.
8. Choose 50/55lbs, turn the dumbbell and place it back in the
dumbbell tray so the weight plates are now on the opposite
side.
Tilted outwards or stuck weight plates / Difficulties with inserting the dumbbell into the
weight plates.
Should the weight plates be tilted outwards, are stuck in the dumbbell try or you have difficulties
inserting the dumbbell into the weight plates, it could be possible that the dumbbell tray must be
adjusted.
⚠
CAUTION
Please make sure that the weight plates are always secured.