Taurus DARWIN FB50, Руководство по сборке

Страница: 13 / 28

11
11
13
2.3 Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
L
NOTICE
+ First loosely screw all parts together and check that they fit properly. Tighten the screws
using the tool only when you are instructed to do so.
+ If you have difficulty recognising the graphics, we recommend that you open and/or
download the PDF instructions stored in the webshop on your end device (e.g. smartphone,
tablet or PC). There you have the option of zooming in closer. Please note that the Adobe
Acrobat Reader programme must be installed on your end device in order to open the file.
+ Some parts might be pre-assembled.
Step 1: Assembly of the Frames, Part 1
1. Slide the carriage (5) onto the main frame (1)
with the short knob (11S).
2. Attach the base frame (3) to the support frame
(2) with three bolts (19) and three washers (22).
3. Attach the foot tube (4) to the support frame (2)
with one bolt (19) and one washer (22).
4. Slide the small covers (12) onto the foot tube (4).
Step 2: Assembly of the Frames, Part 2
1. Attach the second base frame (3) to the main
frame (1) with three bolts (19) and three washers
(22).
2. Attach the support frame (2) to the main frame
(1) with one bolt (18), one washer (21), one
locknut (23) and the long knob (11L).