Taurus BT-CK 18 2B-1.5 Kit, Инструкция по эксплуатации

Страница: 37 / 40

36
After Sales Support EMAIL: service.australia@einhell.com TEL: 1300 922 271
Caution – Read the operating instructions to reduce
the risk of injury
8.1. CORDLESS LAMP SAFETY
RULES
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or serious
injury.
Keep all safety regulations and instructions in a safe place
for future use.
8.2. LAYOUT / ITEMS SUPPLIED
(FIG. 1/2)
8.2.1 Layout
1. ON/OFF switch
2. Adjustable head
3. Handle
4. Locking button for handle
5 Battery pack
6. Pushlock button
8.2.2 Items supplied
• Open the packaging and take out the equipment with
care.
• Remove the packaging material and any packaging and/
or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport
damage.
• If possible, please keep the packaging until the end of the
guarantee period.
IMPORTANT
The equipment and packaging material are not toys. Do not
let children play with plastic bags, foils or small parts. There
is a danger of swallowing or suffocating!
• Cordless Lamp
• Original operating instructions
• Charger (1 x in set included)
• Battery Pack (2 x in set included)
8.3. TECHNICAL DATA
Voltage supply: 18V d.c.
Number of LED’s: 9
Weight: 0.3 kg
8.4. BEFORE STARTING THE
EQUIPMENT
Charge the battery pack with the charger supplied. An empty
battery pack requires a charging period of approximately 1
hour.
For more details about charging the battery pack please read
the operating instructions of the 1-hour charger.
Always remove the battery pack before making adjustments
to the equipment.
Important. Looking into the light beam more than briefly may
be harmful for your eyes.
Mounting and removing the battery pack (Fig. 2/Item 5)
Mounting:
Push the battery pack (5) onto the equipment until it latches
in place.
Removing:
Press the pushlock button (6) and pull the battery pack (5) out
of the equipment.
8.5. OPERATION
8.5.1 Switching ON/OFF (Fig. 1/Item 1)
By pressing the ON/OFF button (1) for the first time, 3 LED
lights illuminate.
By pressing the ON/OFF button (1) for the second time, 6 LED
lights illuminate.
By pressing the ON/OFF button (1) for the third time, 9 LED
lights illuminate.
By pressing the ON/OFF button (1) for the fourth time, the
equipment is switched off.
8.5.2. Adjustable head (Fig 3/Item2)
The adjustable head (2) can be adjusted back and forth.
8.5.3 Handle adjustment (Fig 4/Item3)
The handle (3) can be adjusted in 6 different positions. To
change the handle position press the locking button for the
handle (4) and move the handle in the appropriate position.
8.6. CLEANING, MAINTENANCE
AND ORDERING OF SPARE
PARTS
Always remove the battery pack before starting any cleaning
work!
8.6.1 Cleaning
Keep all safety devices, air vents and the motor housing free
of dirt and dust as far as possible. Wipe the equipment with a
clean cloth or blow it with compressed air at low pressure.
We recommend that you clean the device immediately each
time you have finished using it.
Clean the equipment regularly with a moist cloth and some