Taurus BT-CK 18 2B-1.5 Kit, Инструкция по эксплуатации

Страница: 13 / 40

12
After Sales Support EMAIL: service.australia@einhell.com TEL: 1300 922 271
Caution - Read the operating instructions to reduce
the risk of injury
Wear ear-muffs.
The impact of noise can cau se damage to hearing.
Wear a breathing mask.
Dust which is injurious to health can be generated
when working on wood and other materials.
Never use the device to work on any materials
containing asbestos!
Wear Safety goggles.
Sparks generated during working or splinters, chips
and dust emitted by the device can cause loss of
sight.
Change the gear only when the drill is at a standstill.
If you fail to observe this point, the gearing may be
damaged.
4.1. CORDLESS DRILL SAFETY
RULES
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or serious
injury.
Keep all safety regulations and instructions in a safe place
for future use.
Hold the equipment by the insulated handles when
carrying out work during which the screw or the plug-in
tool could strike concealed power cables. Contact with a live
cable may also make the metal parts of the equipment live
and cause an electric shock.
4.2. LAYOUT / ITEMS SUPPLIED
(FIG. 1/2)
4.2.1 Layout
1. Torque selector
2. Forward/Reverse switch
3. ON/OFF switch
4. Battery pack
5. Pushlock button
6. Selector switch for 1st gear to 2nd gear
7. Quick-change drill chuck
4.2.2 Items supplied
• Open the packaging and take out the equipment with
care.
• Remove the packaging material and any packaging and/
or transportation braces (if available).
• Check to see if all items are supplied.
• Inspect the equipment and accessories for transport
damage.
• If possible, please keep the packaging until the end of the
guarantee period.
IMPORTANT
The equipment and packaging material are not toys. Do not
let children play with plastic bags, foils or small parts. There
is a danger of swallowing or suffocating!
• Cordless Drill
• Original operating instructions
• Charger (1 x in set included)
• Battery Pack (2 x in set included)
4.3. PROPER USE
The cordless drill is designed for tightening and undoing
screws, as well as for drilling in wood, metal and plastic.
The equipment is to be used only for its prescribed purpose.
Any other use is deemed to be a case of misuse. The user
/ operator and not the manufacturer will be liable for any
damage or injuries of any kind caused as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications. Our
warranty will be voided if the machine is used in commercial,
trade or industrial businesses or for equivalent purposes.
4.4. TECHNICAL DATA
Voltage supply 18 V d.c.
Idling speed: 0-400/0-1150 rpm
Torque settings: 25+1
Forward and reverse rotation yes
Chuck capacity 1–13 mm
Weight 1.2 kg
Max. screw diameter: 6 mm
Sound and vibration
Sound and vibration values were measured in accordance
with EN 60745.
L
pA
sound pressure level 76 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 87 dB(A)
K
WA
uncertainty 3 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Drilling in concrete
Vibration emission value a
h
≤ 2.5 m/s
2
K uncertainty = 1.5 m/s 2