BRINK Series - English
28
1) PUSHING FORCE AT THE BEGINNING OF THE CLOSING MANOEUVRE (only the BRINKS version)
This is the pushing force at the beginning of the closing manoeuvre that helps the door to start moving when the
force of the spring alone is unable to provide suffi cient force on start-up.
Increase the value to obtain a higher pushing power.
Press the SET key to access the point 2 adjustment option.
2) PUSHING DISTANCE AT THE BEGINNING OF THE CLOSING MANOEUVRE (only the BRINKS version)
This is the initial part of the closing manoeuvre in which the pushing power described in the previous point 1 is
provided. It helps the door to begin moving on start-up.
Increase the value to obtain a greater distance between the starting point on closing and the point in which the
pushing power ceases.
Press the SET key to access the point 3 adjustment option.
3) NOT USED
Press the SET key to access the point 4 adjustment option.
4) NOT USED
Press the SET key to access the point 5 adjustment option.
5) END OF TRAVEL DISTANCE ON OPENING
This is the distance between end of travel on opening and the fi nal resting point.
Increase the value to increase the distance.
Press the SET key to access the point 6 adjustment option.
6) PUSHING POWER AT END OF OPENING MANOEUVRE
This is the pushing power in the last section of the opening phase. It is useful for preventing friction in the lock from
being detected as an obstruction and preventing the manoeuvre from being completed.
Increase the value to obtain a higher power.
Press the SET key to access the point 7 adjustment option.
7) PUSHING POWER AT END OF CLOSING MANOEUVRE (BRINK version only)
This is the pushing power in the last section of the closing phase. It is useful for preventing friction in the lock from
being detected as an obstruction and preventing the manoeuvre from being completed.
Increase the value to obtain a higher power.
Press the SET key to access the point 8 adjustment option.
8) NOT USED
Press the SET key to access the point 9 adjustment option.
9) PUSHING TIME AT END OF CLOSING MANOEUVRE (BRINK version only)
This is the time for which the motor continues to push in the last closing section. It helps the door to reach its fully
closed position by overcoming any friction.
Increase the value to lengthen the time.
Press the SET key to access the point 10 adjustment option.
10) SLOWING DISTANCE ON OPENING
This is the distance from the end of opening travel in which the door proceeds at a slower speed.
Increase the value to increase the distance.
Press the SET key to access the point 11 adjustment option.
11) SLOWING DISTANCE ON CLOSING
This is the distance from the end of closing travel in which the door proceeds at a slower speed.
Increase the value to increase the distance.
Press the SET key to access the point 12 adjustment option.
ELECTRONIC SECTION
