Tatu Marchesan DCA2 MC 2500, Руководство оператора

Страница: 32 / 68

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
30
DCA² MC 2500, 5500, 7500 & 10500
Set-up instructions
Cardan shaft assembly
When assembling the cardan shaft, it is necessary to be careful and leave the terminals
on both ends aligned. The discrepancy of the terminals in 90° will cause vibrations and a
greater wear on the universal joints, reducing the lifetime of the set.
NOTE • The contact surface between the hub and the bar shall not be smaller than
1/3 of the total length.
Garfos internos desalinhados
1/3 1/3
2/3 2/3
Observe the internal forks alignment
Correct assembly Correct assembly
Unaligned internal forks
Incorrect assembly Incorrect assembly
Cardan working angle
20º 20º
20º 20º
Avoid that the tractor tires touch the drawbar
during maneuvers.
The cardan articulation angle during work is 20° .