TATA Motors XPRES-T EV 2021, Руководство пользователя

Страница: 52 / 161

OPENING AND CLOSING
42
BONNET
Opening
WARNING
Always switch off the ignition before
opening the bonnet.
1.
Make sure that the vehicle is in neu-
tral position with the parking brake
applied.
2.
Pull the bonnet release lever. The
bonnet will pop up slightly.
3.
Raise the bonnet slightly and with
your finger slide the secondary lock
lever located under the bonnet cen-
tre to the left side.
NOTE
Make sure that the wiper arms are
not raised before you lift up the bon-
net to avoid damaging the wiper
arms and the bonnet.
4.
Lift the bonnet up. Pull the bonnet
stay rod from its clip and engage the
free end into the slot.
WARNING
Put the stay rod into the hole se-
curely. If the rod drops off, your body
may be caught below the bonnet.
Closing
1.
To close the bonnet, hold the bonnet
by one hand, disengage the stay rod
and clamp it back properly.
2.
Lower the bonnet close to the
bumper, and then let it drop down.
WARNING
Make sure that the bonnet is locked
properly before driving or it can fly up
unexpectedly during driving.
!
!
!