TATA Motors XPRES-T EV 2021, Руководство пользователя

Страница: 116 / 161

EMERGENCY AND BREAKDOWN ASSISTANCE
106
Rear jacking Location
Assemble the Jack handle and wheel
spanner (as shown in jacking fig.)
Raise it by turning the jack handle clock-
wise until the jack sits completely on the
jack point and the base of the jack lies
evenly on the ground.
Jacking
WARNING
If you do not position the jack cor-
rectly at the appropriate jack up
point of the vehicle, the jack could
tip over when the vehicle is raised.
There is a risk of injury and dam-
age to the jack.
Continue to raise the jack slowly and
smoothly until the tyre clears the ground.
Do not raise the vehicle more than nec-
essary.
Remove wheel mounting nuts with the
help of wheel spanner and take out flat
tyre.
NOTE
Do not place wheel nuts in sand or on
a dirty surface. Do not apply oil or
grease on it.
Roll the spare wheel into position and
align the holes in the wheel studs.
Install wheel nuts with their cone shaped
end facing the wheel. Tighten each nut
by hand until the wheel is securely
seated on the hub.
Lower the jack completely then tighten
the wheel nuts one by one using wheel
spanner.
Press fit the wheel cover back (if
equipped).
Restore all the tools and jack at their
respective location.
Place the flat tyre at spare wheel loca-
tion
.
!