TATA Motors TIGOR EV 2021, Руководство пользователя

Страница: 191 / 236

part of the customer.
On site repairs may be temporary in •
nature. The completion of repairs does
not certify the road worthiness of the
vehicle. The customer is advised to en-
sure temporary repairs carried out on-
site is followed by permanent repairs
at a TATA MOTORS Authorized EV
Dealer/Service Center at the earliest.
Terms and conditions and service cov-
erage, exclusions etc are subject to
change without notice.
In case of Emergency
If the EV stalls at a crossroad or cross-
ing
If the vehicle stalls at a crossroad or cross-
ing, rotate the rotary knob to N (Neutral)
position and then push the vehicle to a
safe place.
If the vehicle stalls while driving
Reduce your speed gradually, keeping •
a straight line. Move cautiously off the
road to a safe place.
Turn on the hazard lamps. •
Try to start the vehicle again. If your •
vehicle will not start, contact an author-
ized Tata Motors EV dealer or seek
other qualified assistance.
Since this vehicle runs on electric •
power, it generates little sound. Be
aware of your driving environment and
drive safely.
After you park the vehicle or while you •
are waiting at a traffic light check
whether there are kids or obstacles
around the vehicle.
Check if there is something behind the •
vehicle when driving in reverse.
Pedestrians may not hear the sound of
the vehicle.
If an accident occurs…
If your vehicle is drivable, park your ve- •
hicle off the road; rotate the gear se-
lector knob to “N” and apply the
parking brake.
If not drivable do not try to start the ve- •
hicle. Rotate the gear selector knob to
N and apply the parking brake.
Roll down the windows and open the •
door locks if possible. If the ‘Ready’
message does not come in the instru-
ment cluster, do not try to switch ON
the supply by pressing the Start/Stop
button.
If there is no electrical supply, at least •
try to unlock single door manually.
If the vehicle ‘Ready’ message flashes •
in the instrument cluster, press the
Start/Stop button to turn off the supply,
and ensure ‘Ready’ message goes off
to verify the high-voltage system is dis-
connected.
EMERGENCY AND BREAKDOWN ASSISTANCE
183