TATA Motors TIGOR EV 2021, Руководство пользователя, Страница: 171 / 236

Assemble the Jack handle and wheel
spanner (as shown in fig.).
Position the jack vertically and raise it by
turning the jack handle clockwise until the
jack sits completely on the specified point
and the base of the jack lies evenly on the
ground.
The jack up points are indicated by cutouts
on the front and rear.
Jack Up Point Location on Vehicle
Jack up point location
Front jacking location
Rear jacking location
Use the jack on level, hard ground. •
Avoid changing the wheel on uphill
and downhill slopes. Chock the
wheels, if the deflated wheel needs
to be changed on slope / ghat area.
Before raising the vehicle, secure it •
from rolling away by applying the
parking brake.
Do not use wooden blocks or similar •
objects as a jack underlay.
Do not place your hands and feet or •
lie under the raised vehicle when it
is supported by a jack.
Do not run the Vehicle should be in •
power off condition, when the vehi-
cle is supported by the jack and
never allow passenger to remain in
the vehicle.
Do not open or close a door or the •
tailgate when the vehicle is raised.
EMERGENCY AND BREAKDOWN ASSISTANCE
163