TATA Motors TIGOR EV 2021, Руководство пользователя, Страница: 170 / 236

162
IN CASE OF FLAT TYRE
Reduce vehicle speed gradually, Avoid •
sudden steering movement or braking.
Pay attention to the traffic conditions •
as you do so.
Switch on the hazard warning lamps. •
Stop the vehicle on solid, non-slippery •
and level ground, as far away as pos-
sible from traffic.
If possible, bring the front wheels into •
the straight-ahead position.
Secure the vehicle against rolling •
away.
Set the parking brake firmly. •
Switch off the motor. •
Keep advance warning triangle at a •
suitable distance behind the vehicle as
an indication of breakdown.
Close all the doors. •
Changing Flat Tyre
Loosen the nuts (as indicated) on the
wheel in diagonal sequence. Do not un-
screw the nuts completely before raising
the vehicle using the jack.
Wheel nut removal
WARNING
If you drive with a flat tyre, there is a risk
of the following hazards:
A flat tyre affects the ability to steer •
or brake the vehicle.
You could lose control of the vehi- •
cle.
Continued driving with a flat tyre will •
permanently damage the tyre and
cause excessive heat buildup and
possibly a fire. There is a risk of an
accident.
WARNING
DO NOT jump start the vehicle, since it
is an EV. If the 12V battery is completely
discharged, contact the nearest TATA
MOTORS EV Service Centre.
NOTE
The jack is designed only to raise •
and hold the vehicle for a short time
while a wheel is being changed. It is
not suited for performing mainte-
nance work under the vehicle.
EMERGENCY AND BREAKDOWN ASSISTANCE