
70
FLAT TYRE REPLACEMENT
EMERGENCY & BREAK DOWN ASSISTANCE
07
NOTE
•
Make sure the jack is positioned
firmly on a level surface and
correct jacking point.
•
Never work under a raised
vehicle that is supported only by
a jack. This may cause an injury.
•
If required to change the wheel
on slope, then block the wheel.
•
Do not use oil or grease on studs
or nuts, which may cause the
breakage and slip of the wheel
stud.
•
Do not start or run the vehicle
while supported by a jack.
•
Remove wheel-mounting nuts and
take out flat tyre.
•
Roll the spare wheel into position
and align the holes in the wheel
studs.
•
Then reinstall the wheel nuts.
Engage threads properly by hand
and tighten it firmly by wheel
spanner.
NOTE
•
Before using the jack, please read
the instructions on the sticker
provided on the jack.
•
Lower the jack completely then
tighten the wheel nuts one by one
using wheel spanner.
•
Press fit the wheel cover back (if
fitted).
•
Restore all the tools and jack at
their respective location.
•
Place the flat tyre at spare wheel
location as described.
NOTE
Check and correct the tyre pressure
and nut tightness of the changed
wheel at nearest service station. Get
the flat tyre repaired at the earliest.
Содержание SUMO GOLD 2017
