
108
LUBRICANT & COOLANT SPECIFICATION
TECHNICAL INFORMATION
09
Lubricants
Recommended lubricants conform to the following
specifications :
1. SAE 15W40 to API CI-4
- Engine oil
(CR-4 / 4SPTC)
2. 75W90 Synthetic GL-4
- Gearbox oils
(BS-IV)
80W90 with 7% Anglomol - Gearbox oils
(BS-III)
3. SAE 85W140 API GL-S
- Rear axle and mechanical
steering gear box oils
4. ATF DEXRON
- Power Steering Oil
Please use only recommended brands for good
performance.
The oil change periods recommended in maintenance
schedule should be adhered to.
Use of reclaimed oil is not recommended.
Engine oil
Recommended grades of engine oil conforming to SAE API
CI-4
(For CR-4)
/ SAE API CI-4
(For 4SPTC)
specifications
and range of ambient temperature at which these can be
used are given below :
Ambient temperature
0
C
Engine oil grade
-10 and above
SAE 15W/40
-20 TO above
SAE 10W/30
or
SAE 5W/20
Hub bearing grease
(Front)
Use Lithium base multipurpose grease.
Brake and clutch fluid
Brake fluid conforming to IS : 8654/DOT 4 is recommended.
Spicer propeller shaft
( as applicable )
Lubricate slip joint with Multipurpose grease - 2 grade
grease.
Lubrication of steering spindle ball joint in mechanical
steering :
Lubricate steering spindle ball joint with Moly Kote - BR 2
grease at every 10,000 km of operation.
Mechanical Steering System (RCBT) : Sliding spindle
on steering column not to be pulled hard as it may
damage the splines / stopper.
Coolants
Presence of dirt in coolant chokes up passages in radiator,
cylinder head and crankcase, thereby causing overheating
of engine.
To prevent rust formation and freezing of coolant inside the
passages of radiator, crankcase and cylinder head use only
branded premixed coolant.
Содержание SUMO GOLD 2017
