TATA Motors Safari 2021, Руководство пользователя, Страница: 44 / 308

36
Lift the bonnet up. Pull the bonnet stay 4.
rod from its clip and insert the free end
into the slot provided on frame.
Engine Bonnet Stay rod
Closing
To close the bonnet, hold the bonnet 1.
by one hand, disengage the stay rod
and clamp it back properly.
Lower the bonnet close to the bumper, 2.
then let it drop down.
NOTE
Make sure that the wiper arms are not
raised before you lift up the bonnet to
avoid damaging the wiper arms and the
bonnet.
WARNING
The stay rod can be hot enough to •
burn your finger right after driving.
To avoid this, use rubber packing
given on stay rod.
Touch the rod after it becomes cool •
enough.
Insert the stay rod into the hole se- •
curely. If the rod drops off, your body
may be caught below the bonnet.
WARNING
Ensure that the bonnet is properly
locked before driving or it can fly up un-
expectedly during driving
.
OPENING AND CLOSING