TATA Motors Safari 2021, Руководство пользователя, Страница: 213 / 308

IN CASE OF FLAT TYRE
Reduce vehicle speed gradually, Avoid •
sudden steering movement or braking.
Pay attention to the traffic conditions •
as you do so.
Switch on the hazard warning lamps. •
Stop the vehicle on solid, non-slippery •
and level ground, as far away as pos-
sible from traffic.
Use the Jack on level, hard ground. •
Avoid changing the wheel on uphill and
downhill slopes. Chock the wheels, if
the deflated wheel needs to be
changed on slope / ghat area.
If possible, bring the front wheels into •
the straight-ahead position.
Secure the vehicle against rolling •
away.
Set the parking brake firmly and shift •
into “R” (Reverse) gear on level ground
and while vehicle is in downhill posi-
tion.
When the vehicle is in uphill position, •
shift the gear in first gear.
Switch off the engine. •
Keep advance warning triangle at a •
suitable distance behind the vehicle as
an indication of breakdown.
Close all the doors. •
Chock the wheels. •
Changing Flat Tyre
Remove the center hub cap/wheel cover
in case of steel wheel rim (if available).
Loosen the nuts (as indicated) on the
wheel in diagonal sequence. Do not un-
screw the nuts completely before jacking
the vehicle.
Wheel nut removal
WARNING
If you drive with a flat tyre, there is a risk
of the following hazards:
A flat tyre affects the ability to steer •
or brake the vehicle.
You could lose control of the vehi- •
cle.
Continued driving with a flat tyre will •
permanently damage the tyre and
cause excessive heat buildup and
possibly a fire. There is a risk of an
accident.
NOTE
The jack is designed only to raise •
and hold the vehicle for a short time
while a wheel is being changed. It is
EMERGENCY AND BREAKDOWN ASSISTANCE
205