TATA Motors Nano, Руководство владельца и сервисная книжка

Страница: 18 / 94

16
High Beam Indicator :
The indicator light comes on when
the High beam is selected or also
when he headlight flasher is
operated.
Service Indicator (BS-III) :
MIL Indicator (BS-IV)
This lamp indicates your vehicle’s
engine condition when a
malfunctioning occurs in the engine,
wiring harness, EMS, etc. this lamp
indicates as below:
1. Comes ‘ON’ when key is in ‘IGN’
position and goes ‘OFF’ when
engine is running.
2. Remains “ON” while the engine
is running if malfunctioning
occurs.
3. Starts ‘BLINKING’ if continous
problem of malfunction is
observed, contact nearest Tata
Authorised service outlet.
Driving under this condition may
lead to severe damage to the
engine parts.
CAUTION
When “Service OR MIL” indicator
is ON or blinking while the engine
is running, the engine’s
performance deteriorates
marginally and s o m e t i m e s
drastically. Please get the
malfunctioning rectified at a
nearest authorized service center.
INDICATORS
Turn Signal Indicator :
Turn signal indicators can be
operated only when ignition is ‘ON’.
They can be operated by using the
turn indicator switch on the combi-
switch. The direction indicator arrow
(LHS) and (RHS) on the
instrument cluster flashes along with
external indicators lights as per
selection.
CAUTION
If the turn signal indicators do not
blink, then there may be problem
in electrical system. If the
indicators “Blink rapidly”, then this
indicates that a side indicator bulb
has failed. Get it rectified
immediately.
Front Fog Lamp
Indicator (If equipped) :
Front fog lamps are provided on the
front bumper to improve the visibility
in foggy weather. The front fog lamp
switch is provided on combi switch.
Rear Fog Lamp
Indicator (If equipped)
Rear fog lamp is provided on rear
bumper to improve the visibility and
warning in foggy weather or during
heavy rains. The rear fog lamp switch
is provided on combi-switch.
NOTICE
Use only during foggy condition if
required.
AN OVERVIEW