TATA Motors Indigo eCS, Руководство владельца и сервисная книжка

Страница: 37 / 166

35
BEFORE DRIVING
ELECTRICAL SECURITY SYSTEM
Ignition is switched OFF and key removed subsequently,
vehicle can auto immobilise again.
a) If the complete system is armed by remote, enter
the vehicle using the mechanical key and turn the Ignition
ON and then to OFF.
i) The turn indicators start flashing and audio alarm starts
sounding. In the meantime the instrument cluster LED
stops flashing for about 5 seconds and then starts
flashing very slowly.
ii) Count the number of these slow flashes.
iii) When the number of flashes are equal to the first
digit of your secret code, turn the ignition ON (for
example, if the first digit of your code is 3, wait for the
LED to flash 3 times before turning the ignition ON).
The instrument cluster LED gives some quick flashes
indicating that the first digit entered is correct. Turn the
Ignition OFF.
iv) After the quick flashes the instrument cluster LED
stops flashing for about 2 seconds and then starts
flashing slowly.
v) Count the number of flashes. When the numbers of
flashes are equal to the second digit of your secret code,
turn the Ignition ON (for example, if the second digit of
your code is 2 wait for the LED to flash twice before
turning the ignition ON).
The instrument cluster LED gives some quick flashes
indicating that the second digit entered is correct. Turn
the Ignition OFF.
In the same manner you can enter the remaining digits
of your secret code, following the above procedure from
step no. (iv) above. In case of error take out the key and
insert it again into the Ignition switch, turn the ignition
switch ON and OFF and repeat the procedure from step
no. i above.
ONCE ALL THE DIGITS HAVE BEEN ENTERED
PROPERLY THE SYSTEM WILL DISARM ITSELF.
THIS WILL BE CONFIRMED BY THE SHORT
FLASHING OF TURN INDICATORS. THEREAFTER,
THE VEHICLE CAN BE STARTED.
b) If only Immobiliser is armed due to automatic
activation then enter the vehicle and insert the key into
the Ignition switch. No audio alarm sounding and flashing
of turn indicators will take place. Switching the ignition
to ON and then OFF will stop blinking of instrument
cluster LED. Wait for the instrument cluster LED to start
flashing slowly. Starts from step no. ii above to disarm
the system.