TATA Motors Indigo eCS, Руководство владельца и сервисная книжка

Страница: 71 / 166

69
BEFORE DRIVING
REVERSE PARK ASSIST SYSTEM
REVERSE PARK ASSIST SYSTEM (RPAS) WITH
AUDIO : (IF FITTED)
An ultrasonic sensor based reverse guiding system is
equipped on your vehicle to aid safe driving while reversing
the vehicle.
The system alerts you of obstacles while reversing the
vehicle at low speed. This system consists of three
reverse park assist ultrasonic sensors, a controller & a
buzzer. The RPAS system gives only an audible signal,
when the rear bumper of your vehicle comes closer to an
object. The buzzer operates with different an audible sig-
nals as per the distance between rear bumper and obsta-
cles to alert the driver.
The system is automatically activated when the reverse
gear is engaged.
Operating Instructions:
Switch ‘ON’ the ignition. On engaging the reverse gear, the
RPAS system will get activated automatically. When the
obstacle enters the sensing zone, the system starts
giving an audio indication (initially for 0.8 second).
The buzzer beep frequency and buzzer sound time
duration depends on the obstacle distance as given below:
Zone 1 : This zone is nearest to the rear bumper (30 cm to
50cm). Sensors detect obstacles and give an audio signal
(Continuous beep).
Zone 2 : This zone is the middle zone (51 cm to 75cm).
Sensors detect obstacles and give an audio signal (Fast
beep).
Zone 3 : This is the most distant zone (76 cm to 110cm).
Sensors detect obstacles and give an audio signal (Slow
beep).
Stop the vehicle immediately once the continuous beep
starts as the vehicle is very close to the obstacle.
Sensors - Reverse Park Assist System