manualshive.com logo in svg

TATA Motors Indigo eCS, Руководство владельца и сервисная книжка

Поделиться
Скачать
TATA Motors Indigo eCS Скачать руководство пользователя страница 121

119

MAINTENANCE & CAR CARE

SPARK PLUG & CARBON CANISTER

SPARK PLUG (MPFI) :

Spark Plug

-

BOSCH

Spark Plug No.

-

FR6 DC4

Spark Plug Gap

-

0.7 mm to 0.8 mm

You should inspect the spark plugs periodically for carbon
deposits. When carbon accumulates on the spark plug, a
strong spark will not be produced. Remove carbon deposits
using a spark plug cleaner.

Spark Plug Replacement :

1. Clean up any dirt or oil that

is collected around the
spark plug caps.

2. Pull out the spark plug

cables by gripping at the
connector.

3. Remove the spark plug with

the help of a special socket.

4. Check and adjust the gap,

it should be 0.7 mm to 0.8
mm.

5. Replace the spark plug if

the gap is more than 1.2
mm.

6. Fix the spark plug and tighten it to the torque of 25 Nm

(dry).

7. Fit the spark plug cable, until a 'click' sound is heard.

Repeat the procedure for the other spark plugs.

NOTICE

Tighten the spark plug carefully. Overtightening can
damage the threads in the cylinder head. A loose spark
plug or loose spark plug  cable can affect combustion
and cause damage to engine and catalytic converter.

CARBON CANISTER (MPFI) :

As petrol evaporates in the fuel tank, hydrocarbons are
discharged into the atmosphere. The carbon canister stores
these hydrocarbons from the fuel tank.

Air drawn through the carbon canister into the engine should
be controlled to maintain exhaust emissions within desired
limits as well as to ensure good driveability.

The carbon canister should be replaced at an Authorised Service
outlet.

Ç

Ç

Ç

Ç

Ç

Ç Ç Ç Ç Ç

0.7mm to
0.8mm

Содержание Indigo eCS







































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды