cleaner and follow instructions on the packaging.
TROUBLESHOOTING
LED Error Guide
1st LED flashing: Internal cooktop failure - Contact [email protected].
2nd LED flashing: IGBT sensor error - Contact [email protected].
3rd LED flashing: IGBT over temperature protection - The cooktop has turned off to avoid
burning your cookware. Allow the cooktop to cool and try again.
4th LED flashing: Empty pot or pan detected on the cooktop. The cooktop has turned off to
avoid burning your cookware. Allow the cooktop to cool and try again.
5th LED flashing: Under/over voltage - The cooktop only works with US outlets. Try plugging
it into another outlet or contact [email protected].
6th LED flashing: Wired probe is not located properly - Try plugging the wired probe in again.
8th LED flashing: No pot detected on the cooktop. Place an induction-compatible pot or pan
on the cooktop to continue.
9th LED flashing: Surface thermistor fail or not connected - Contact [email protected].
10th LED flashing: Wired probe not connected - Plug the thermometer probe completely into
the cooktop.
Bluetooth Connection Issues
If the One Top is not connecting to the Tasty app via Bluetooth, reset the Bluetooth
connection by pressing the - and + buttons simultaneously on the cooktop.
If that does not fix the connection, remove the cooktop from the Bluetooth settings on your
mobile device. To do this, in the Bluetooth settings, tap the Info (i) symbol next to
Tasty One
Top, then tap Forget This Device. Reconnect to the cooktop using the steps in the
Connecting to the Tasty App
section.
21
