Tasselli PANDA H205, Руководство по эксплуатации и обслуживанию

Страница: 8 / 68

8
PANDA
USE AND MAINTENANCE MANUAL
428900224 237
EN
2.3.3 Explosive atmosphere
The equipment must not be located in an area classifi ed as an explosion risk according to
1999/92/EC such as:
Zone 0
An area in which there is a permanent, long-lasting or frequently explosive atmosphere made
up of a mixture of air and fl ammable substances in the form of gases, fumes or steam.
Zone 1
An area in which the formation of an explosive atmosphere, made up of a mixture of air and
fl ammable substances in the form of gases, fumes or steam is occasionally probable during
normal activities.
Zone 20
An area in which there is a permanent, long-lasting or frequently explosive atmosphere in the
form of clouds of combustible dust in the air.
Zone 21
An area in which the formation of an explosive atmosphere in the form of clouds of combustible
dust is occasionally probable during normal activities.
2.3.4 Slipping
Any leaks in the areas surrounding the appliance may cause personnel to slip.
Check that there are no leaks and keep these areas clean at all times.
2.3.5 Tripping
Generally untidy deposits of material may constitute a tripping hazard and a total or partial
obstruction of emergency exit routes.
Ensure that operating and transit areas and emergency exit routes are free from obstacles in
compliance with current legislation.
2.3.6 Circuit faults
Owing to potential faults, safety circuits may become less effective, which results in lower
safety levels.
You should check the operational condition of the appliance devices regularly.
2.3.7 Falling objects
Positioning of the cabinet display parts (i.e. counters, rods and hooks), as also product
arrangement inside the cabinet can be the source of potential hazards if not properly
performed.
Follow the positioning instructions described in this Manual before you place products inside
the cabinet, check that the counters are properly fastened, as also the hooks, etc. Do not
exceed the maximum load limit. Do not tilt the shelves.
Do not place any goods and in general, do not load the tank sliding element closing devices
with any load, while open or closed.
2.3.8 Cooling
During different operations to perform on the counter, such as cleaning or loading goods, it is
necessary to handle products and/or counter parts at a low temperature with the risk of "cold
injury" for the operators and/or accidental slipping hazard.
Follow the safety regulations in the place where the cabinet is installed; more specifi cally, be
sure to always use the right PPE (especially gloves).