Tasselli PANDA H205, Руководство по эксплуатации и обслуживанию

Страница: 56 / 68

56
PANDA
USE AND MAINTENANCE MANUAL
428900224 237
EN
KEY PRESSURE
SINGLE KEY
PRESSURE
COMBINED WITH OTHER KEYS
• If pressed for more than 5
seconds, accesses the menu
‘parameter setting of type “f”
(frequent).
• In case of an alarm silence the
audible alarm (buzzer) and
deactivates the relay d ‘alarm.
• If pressed for more than 5 s,
together with the key set, gives
access to the menu ‘parameter
setting of type “c” (confi guration)
or downloading parameters.
• If pressed for more than 5 s,
together with the key up / aux
resets any alarms alarms with
manual reset default serial.
Start-up: if
pressed for
more ‘than 5
S at start-up,
activate the
parameter
setting
procedure.
Automatic
address
assignment:
if pressed for
more ‘than 1
S enters the
procedure
of automatic
assignment of’
address.
• If pressed for more than 1 s,
enables / disables the ‘auxiliary
output.
• If pressed for more than 5 seconds with the key DOWN / DEF,
activates / deactivates the continuous cycle operation.
• If pressed for more than 5 seconds with the SET button,
activates the procedure for printing the report.
• If pressed for more than 5 seconds with the PRG / MUTE, resets
any alarms with manual reset.
• If pressed for more than 5
seconds, activates / deactivates
a manual defrost.
• If pressed for more than 5 seconds with the button UP / AUX,
activates / deactivates the continuous cycle operation.
• If pressed for more than 1 s with the SET button, the display
shows the submenu A ‘with the parameters HACCP alarm (HA,
HAn, HF, HFn).
• If pressed for more than 1 s,
displays and / or sets the set
point.
• If pressed for more than 5 seconds with the PRG / MUTE, gives
access to the menu ‘parameter setting of type “C” (confi guration)
or downloading documents.
• If pressed for more than 1 s with the key DOWN / DEF, A sub-
menu appears on the display ‘with the parameters HACCP alarm
(HA, HAn, HF, HFn).
• If pressed for more than 5 seconds with the button UP / AUX,
activates the procedure for printing the report.
Attention:
The pressure of each text is signaled by a short beep can not be disabled.
Attention
The electronic control board is
installed already programmed.
Any changes to the control
board settings can be carried
out exclusively by qualifi ed
technical personnel.
Attachment 19 - CONTROL PANEL - IR33 - Sheet 1 of 2