TRAMPOLINE MAT ASSEMBLY
16
Step 6
– Spring Assembly
When attaching the springs, do not place your hands, arms, legs or any other body part close to the connector
points (i.e. joints connecting the steel tubes). The connector points can become pinch points as the trampoline
springs tighten up. Wear heavy duty working gloves to protect your hands from injuries during installation by the
springs and protective goggles to avoid injuries to the eyes. Be steady when installing the springs as it can
rebound and fly off if you inadvertently let go when not hooked properly. Make sure no children are playing
nearby when installing the trampoline.
Starting at point
“ONE”, hook one end of the Spring (#7) into the Triangle-Ring on the Mat (#1). Holding
the Spring Loading Tool (#9) underhand, pull the other end of the Spring and lock it into the hole on the
frame as shown below.
Hint:
Tap on the Spring (#7) with the handle of the Spring Loading Tool to make sure it is securely latched into
the hole.
Important:
Note the shape and directions of the spring in the image.
The “CURVED HOOK” end must be
connected to the “Triangle-ring”.
