background image

©Copyright Task Force Tips LLC 2008-2021

20

LIY-300 May 28, 2021 Rev19

TASK FORCE TIPS LLC

MADE IN USA · tft.com 

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 · 219-462-6161 · Fax 219-464-7155

10.0 OPERATION AND INSPECTION CHECKLIST

BEFORE EACH USE,

 appliances must be inspected to this checklist:

1. All valves (if so equipped) open and close fully and smoothly

2. Waterway is clear of obstructions

3. There is no damage to any thread or other connection

4. All locks and hold-down devices work properly

5. The pressure setting on the relief valve (if so equipped) is set correctly

6. Gaskets are in good repair

7. There is no obvious damage such as missing, broken or loose parts

8. There is no damage to the appliance that could impair safe operation (e.g. dents, cracks, corrosion, or other defects)

9. All swiveling elements rotate freely

10. Nozzle is securely attached 

BEFORE BEING PLACED BACK IN SERVICE,

 appliances must be inspected to this checklist:

1. All valves (if so equipped) open and close smoothly and fully

2. The waterway is clear of obstructions

3. There is no damage to any thread or other type connection

4. The pressure setting of the relief valve, if any, is set correctly

5. All locks and hold-down devices work properly

6. Internal gaskets are in accordance with NFPA 1962

7. There is no damage to the appliance that could impair safe operation (e.g. dents, cracks, corrosion, or other defects)

8. All swiveling connections rotate freely

9. There are no missing parts or components

10. The marking for maximum operating pressure is visible

11. There are no missing, broken, or worn lugs on couplings

NFPA  1962:  Standard  for  the  care, use, inspection,  service  testing,  and  replacement of fire  hose,  couplings,  nozzles  and  fire hose appliances.  Quincy, MA:  National Fire

Protection Agency 

WARNING

Equipment failing any part of the checklist is unsafe for use and must have the problem corrected 

before use or being placed back into service. Operating equipment that has failed the checklist is a 

misuse of this equipment. 

Содержание TORNADO





















Отзывы: