background image

©Copyright Task Force Tips, Inc. 2011-2013 

LIG-012 April 9, 2013 Rev02

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

13.0  INSPECTION CHECKLIST

Nozzle must be inspected before each use for proper operation and function according to this checklist. Check that:

1.  There is no obvious damage such a missing broken or loose parts, damaged labels, etc.

2.  Coupling is tight and leak free.

3.  Valve handle moves freely though full range and shuts off fl ow.

4.  Index ring moves smoothly to all positions including fl ush.

5. Nozzle 

fl ow is adequate as indicated by pump pressure and nozzle reaction.

6.  Shaper turns freely and adjusts pattern through full range.

7.  Shaper detent (if so equipped) operates smoothly and positively.

8.  Shaper lock out lever (if so equipped) releases and engages smoothly.

WARNING

Any nozzle failing any part of the inspection checklist is unsafe and must have the problem 
corrected before use. Operating a nozzle that fails any of the above inspections is a misuse of 
the equipment.

14.0 WARRANTY

Task Force Tips, Inc., 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA (“TFT”) warrants to the original purchaser of its 
G-Force series nozzles (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in 
material and workmanship during the fi ve (5) year period from the date of purchase.

TFT’s obligation under this warranty is specifi cally limited to replacing or repairing the equipment (or its parts) which are shown by 
TFT’s examination to be in a defective condition attributable to TFT. To qualify for this limited warranty, the claimant must return the 
equipment to TFT, at 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA, within a reasonable time after discovery of the 
defect. TFT will examine the equipment.  If TFT determines that there is a defect attributable to it, TFT will correct the problem within 
a reasonable time.  If the equipment is covered by this limited warranty, TFT will assume the expenses of repair.

If any defect attributable to TFT under this limited warranty cannot be reasonably cured by repair or replacement, TFT may elect to 
refund the purchase price of the equipment, less reasonable depreciation, in complete discharge of its obligations under this limited 
warranty. If TFT makes this election, claimant shall return the equipment to TFT free and clear of any liens and encumbrances.

This is a limited warranty. The original purchaser of the equipment, any person to whom it is transferred, and any person who is 
an intended or unintended benefi ciary of the equipment, shall not be entitled to recover from TFT any consequential or incidental 
damages for injury to person and/or property resulting from any defective equipment manufactured or assembled by TFT. It is agreed 
and understood that the price stated for the equipment is in part consideration for limiting TFT’s liability. Some states do not allow the 
exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

TFT shall have no obligation under this limited warranty if the equipment is, or has been, misused or neglected (including failure to 
provide reasonable maintenance) or if there have been accidents to the equipment or if it has been repaired or altered by someone 
else.

THIS IS A LIMITED EXPRESS WARRANTY ONLY. TFT EXPRESSLY DISCLAIMS WITH RESPECT TO THE EQUIPMENT ALL 
IMPLIED WARRANTIES OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. 
THERE IS NO WARRANTY OF ANY NATURE MADE BY TFT BEYOND THAT STATED IN THIS DOCUMENT.

This limited warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.

Содержание G-Force

















Отзывы: