background image

©Copyright Task Force Tips LLC  2011-2019 

LIG-012 March 28, 2019 Rev06

35

11.4  REPAIR

Factory  service  is  available  with  repair  time  seldom  exceeding  one  day  in  our  facility.  Factory-serviced  nozzles  are  repaired  by 
experienced technicians, wet tested to original specifi cations, and promptly returned. Repair charges for non-warranty items are 
minimal. Any returns should include a note as to the nature of the problem and whom to reach in case of questions.
Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability 
for damage to equipment or injury to personnel that is a result of user service. Contact the factory or visit the web site at tft.com for 
parts lists, exploded views, test procedures and troubleshooting guides.
Performance tests shall be conducted on the G-Force nozzle after a repair, or anytime a problem is reported to verify operation in 
accordance with TFT test procedures. Consult factory for the procedure that corresponds to the model and serial number of the 
nozzle. Any equipment which fails the related test criteria should be removed from service immediately. Troubleshooting guides are 
available with each test procedure or equipment can be returned to the factory for service and testing.

CAUTION

Any alterations to the nozzle and its markings could diminish safety and constitutes a misuse 
of this product.

12.0 WARRANTY

Task Force Tips LLC, 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA (“TFT”) warrants to the original purchaser of its 
G-Force series nozzles (“equipment”), and to anyone to whom it is transferred, that the equipment shall be free from defects in 
material and workmanship during the fi ve (5) year period from the date of purchase.
TFT’s obligation under this warranty is specifi cally limited to replacing or repairing the equipment (or its parts) which are shown by 
TFT’s examination to be in a defective condition attributable to TFT. To qualify for this limited warranty, the claimant must return the 
equipment to TFT, at 3701 Innovation Way, Valparaiso, Indiana 46383-9327 USA, within a reasonable time after discovery of the 
defect. TFT will examine the equipment.  If TFT determines that there is a defect attributable to it, TFT will correct the problem within 
a reasonable time.  If the equipment is covered by this limited warranty, TFT will assume the expenses of repair.
If any defect attributable to TFT under this limited warranty cannot be reasonably cured by repair or replacement, TFT may elect to 
refund the purchase price of the equipment, less reasonable depreciation, in complete discharge of its obligations under this limited 
warranty. If TFT makes this election, claimant shall return the equipment to TFT free and clear of any liens and encumbrances.
This is a limited warranty. The original purchaser of the equipment, any person to whom it is transferred, and any person who is 
an intended or unintended benefi ciary of the equipment, shall not be entitled to recover from TFT any consequential or incidental 
damages for injury to person and/or property resulting from any defective equipment manufactured or assembled by TFT. It is agreed 
and understood that the price stated for the equipment is in part consideration for limiting TFT’s liability. Some states do not allow the 
exclusion or limitation of incidental or consequential damages, so the above may not apply to you.
TFT shall have no obligation under this limited warranty if the equipment is, or has been, misused or neglected (including failure to 
provide reasonable maintenance) or if there have been accidents to the equipment or if it has been repaired or altered by someone 
else.
THIS IS A LIMITED EXPRESS WARRANTY ONLY. TFT EXPRESSLY DISCLAIMS WITH RESPECT TO THE EQUIPMENT ALL 
IMPLIED WARRANTIES OF MERCHANTABILITY AND ALL IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE. 
THERE IS NO WARRANTY OF ANY NATURE MADE BY TFT BEYOND THAT STATED IN THIS DOCUMENT.
This limited warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.

Содержание G-Force G A Series





































Отзывы: