Chapter 2: Getting to Know Your Axon Body 2 Camera 3
TASER Axon Body 2 Camera User Manual
Function LED
Shows when certain functions are enabled.
Function Enabled
Function LED
Mute
Blinking blue
Camera error
Solid red
Connection Socket
– Enables data transfer and recharging.
On/Off Switch
– Turns the camera’s power on or off.
On/Off Indicator
– When the camera’s power is turned on, the red portion is exposed. When the camera power is
turned off, the red portion is covered from view.
Speaker
– Provides audio notifications.
Function Button
– Used in device pairing, to mute the device, and to add markers to the video as it is recorded.
EVENT Button
– Used to start and stop recording. (Double-press to start; hold for four seconds to stop recording.)
The camera might take several additional seconds to close out of the video when it is powered off before stopping
an event.
Battery Status Button
– When pressed, the Battery button lights up the Battery LED, which momentarily indicates
the remaining battery capacity only (it does not indicate the operating mode).
Battery LED
When lit, momentarily indicates the remaining battery capacity (it does not indicate the operating mode).
Battery Status
Battery LED
Battery capacity is 41–100 percent
Green
Battery capacity is 20–40 percent
Yellow
Battery capacity is less than 20 percent
Red during operation; flashing red and yellow during
charging
Battery is critically low
Blinking red and yellow
When you turn the camera on, the Operation LED turns solid red until the system is ready to use. Then the Opera-
tion LED blinks green (BUFFERING mode) and the Battery LED goes out.
Dual-Channel Microphone
– For audio recording.
Upload Status LED
Indicates status when the camera is uploading data to the Evidence.com website via the Axon Dock 2.
System Status
Upload Status LED
Initial connection (momentary)
Solid red (for 20 seconds or fewer)
In queue awaiting upload
Solid yellow
Device ready (all videos uploaded successfully) and ful-
ly charged
Solid green
