Chapter 2: Getting to Know Your Axon Body 2 Camera 4
TASER Axon Body 2 Camera User Manual
System Status
Upload Status LED
Device not assigned, agency mismatch, camera set in
the offline mode, or device error
Blinking red
Uploading data
Blinking yellow –
DO NOT remove the camera from
the Axon Dock
2
Firmware update, internal battery charging, extremely
low battery, or memory full
Blinking red and yellow –
DO NOT remove the camera
from the Axon Dock
2
Transfer error, device re-trying to transfer
Blinking green and yellow
Network error (no connection)
Blinking red, yellow, and then green (cycling all colors)
Axon Dock 2 has no communication with the camera.
Contact TASER customer service.
LED off
Lens
– The camera lens.
Pressing buttons causes the Axon Body 2 camera to emit audio alerts (beeps) to indicate system actions. See
Chap-
ter 4: Notification Reference Tables
or more information.
Accessories
The Axon Body 2 camera is designed to work with the new Axon RapidLock mounting system. The RapidLock
mounting system consists of the attachment piece (called the key) on the camera and the various mounting op-
tions including the attachment receiver (called the lock). To engage the Axon RapidLock, insert the key of the
camera into the lock of the mount and turn it 90 degrees counterclockwise (when you are looking straight at the
mount). To release the camera from the mount, turn the camera 90 degrees clockwise.
The various mounts that use this system can be used with a wide variety uniforms, and holds the camera to your
shirt, patrol vest, jacket, or belt.
Parts
back
lock
camera
