Tascam US-16X08 Скачать руководство пользователя страница 3

Страница: 3 / 34

TASCAM US-16x08

1 – Introduction

Features

• Built-in Ultra-HDDA mic preamps with discrete construction

that achieves −125dBu EIN

• Support for direct guitar input

• Input specifications that can handle the sound pressures of

drum recording easily

• 8 XLR inputs that s48V phantom power and 6 TRS

inputs that can be switched between −10 dBV and +4 dBu

• Standalone mic preamp use also supported

• Support for high resolution recording formats up to

24-bit/96kHz

• USB 2.0 computer connection

• Advanced DSP mixer with four-band equalizer and

compressor on each channel

• Driver software that can be installed without connecting

the unit

• Angled design provides excellent usability on a desktop

• Tough metal casing can endure even hard use

• Separate controls for line and headphones output volumes

• Supports connection with an iPad or other iOS device

• Operation confirmed with major DAW software (Sonar,

ProTools, Cubase, Live, Studio One, GarageBand)

• MIDI input and output enable connection with keyboards

and other MIDI devices

• Rack mount adapters and hex key included

• Support for Windows and Mac

• High 56dB input level range supports dynamic mic input

• Balanced analog TRS output jacks suitable for connection to

powered monitors

• Standard stereo TRS headphones jack with 70mW per

channel output

• Low latency monitoring through the DSP mixer

• Patch bay allows outputs to be assigned freely

• Scene memories can store DSP mixer settings (up to 10

scenes can be stored and renamed)

• 8 balanced analog TRS output jacks

• AC adapter included

Note about computer operation

If you are unsure about anything related to the basic operation

of a computer when it is mentioned in an explanation in this

manual, please refer to the computer operation manual.

This product incorporates a Blackfin® processor made by

Analog Devices, Inc.

Conventions used in this manual

The following conventions are used in this manual.

• Switches, connectors and other physical parts of this unit

are written using a bold font like this: PHONES knob.

• Information shown on the computer display is written like

this “OK”.

• As necessary, additional information is provided under TIP,

NOTE and CAUTION headings.

TIP

These are tips about how to use the unit.

NOTE

These provide additional explanations and describe special

cases.

CAUTION

Failure to follow these instructions could result in injury,

damage to equipment or lost recording data, for example.

Содержание US-16X08



































Результаты поиска

Содержание US-16X08

Отзывы:

Похожие инструкции для US-16X08

Бренды по названию

Популярные бренды

Tascam US-16X08, Справочное руководство

Результаты поиска

Содержание US-16X08

Отзывы:

Похожие инструкции для US-16X08

Бренды по названию

Популярные бренды