Tascam SB-16D Скачать руководство пользователя страница 17

IMPORTANT SAFETY INSTRUCTIONS

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). 
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within equilateral triangle, is intended to alert the 

user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may 

be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence 

of important operating and maintenance (servicing) instructions in the literature accompanying 

the appliance.

   

CAUTION:  Risk of electric shock. To completely cut off the power supply to the unit, always 

disconnect all power sources.

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT 

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

1. 

Read these instructions.

2. 

Keep these instructions.

3. 

Heed all warnings.

4. 

Follow all instructions.

5. 

Do not use this apparatus near water.

6. 

Clean only with dry cloth.

7. 

Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

8. 

Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 

that produce heat.

9. 

Do not defeat the safety purpose of the polarized or 

grounding-type plug. A polarized plug has two blades with 

one wider than the other. A grounding type plug has two 

blades and a third grounding prong. The wide blade or the 

third prong are provided for your safety. If the provided 

plug does not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

10. 

Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the 

point where they exit from the apparatus.

11. 

Only use attachments/accessories specified by the 

manufacturer.

12. 

Use only with the cart, stand, tripod, bracket, or table 

specified by the manufacturer, or sold with the apparatus. 

When a cart is used, use caution when moving the cart/

apparatus combination to avoid injury from tip-over.

13. 

Unplug this apparatus during lightning storms or when 

unused for long periods of time.

14. 

Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in any 

way, such as power-supply cord or plug is damaged, liquid 

has been spilled or objects have fallen into the apparatus, 

the apparatus has been exposed to rain or moisture, does 

not operate normally, or has been dropped.

 

i

The apparatus draws nominal non-operating power from the 

AC outlet with its POWER or STANDBY/ON switch not in the 

ON position.

 

i

The mains plug is used as the disconnect device, the 

disconnect device shall remain readily operable.

 

i

If you are experiencing problems with this product, contact 

TEAC for a service referral. Do not use the product until it has 

been repaired.

WARNING

 

i

Products with Class 1 construction are equipped with a 

power supply cord that has a grounding plug. The cord of 

such a product must be plugged into an AC outlet that has 

a protective grounding connection.

CAUTION

 

i

Do not expose this apparatus to drips or splashes.

 

i

Do not place any objects filled with liquids, such as vases, 

on the apparatus.

 

i

Do not install this apparatus in a confined space such as a 

book case or similar unit.

 

i

The apparatus should be located close enough to the AC 

outlet so that you can easily grasp the power cord plug at 

any time.

 

i

If the product uses batteries (including a battery pack 

or installed batteries), they should not be exposed to 

sunshine, fire or excessive heat.

 

i

CAUTION for products that use replaceable lithium 

batteries: there is danger of explosion if a battery is 

replaced with an incorrect type of battery. Replace only 

with the same or equivalent type.

 

i

Installed battery subjected to extremely low air pressure 

may result in an explosion or the leakage of flammable 

liquid or gas.

TASCAM  SB-16D  

17

ENGLISH

OWNER’S MANUAL

Содержание SB-16D









































Отзывы: