4 – Recorder
TASCAM 2488
User’s Guide
51
COPY -> PASTE
This function takes the section of a track or tracks
marked by the IN and OUT points, copies it, and
places it at the TO point on the chosen track or
tracks.
The original source is left unchanged.
The copy operation overwrites anything which is
already recorded at the destination. The destination is
the same length as it was before the operation.
You can copy the section more than once in one oper-
ation.
You can change the following values:
Src.Trk
This sets the source track or tracks from
which the section is copied. Choose
1
through
24
to
select an individual track. Choose
1/2
,
3/4
,
5/6
etc. to
select a pair of tracks. Choose
1-24
to select all tracks.
Dst. Trk
This sets the destination track or tracks to
which the selected section is pasted. What you can
select here depends on what you have selected for the
source track. If you have selected a single track, you
can select tracks
1
through
24
here. If you have
selected a pair of tracks (for instance,
1/2
), you can
only select track pairs here. If you have selected all
tracks (
1-24
), then
1-24
is the only option available to
you here.
Times
This is the number of times that the selected
section is pasted into the destination track or tracks.
You can set this value from
1
to
99
.
Press
YES
to perform the operation or
NO
to leave
this screen.
NOTE
You can also use the
SHIFT
+
TRIM
key combination to
enter this function easily.
COPY -> INSERT
This function takes the section of a track or tracks
marked by the IN and OUT points, copies it, and
places it on the chosen track or tracks, inserting it as
new material, starting at the TO point.
The original source is left unchanged.
The insert operation adds the selected section as new
material to the destination. Nothing is overwritten on
the destination, as any existing material following the
TO point is moved to the end of the newly-inserted
section. The destination is longer than it was before
the operation.
You can copy the section more than once in one
operation.
You can change the following values:
Src. Trk
This sets the source track or tracks from
which the section is copied. Choose
1
through
24
to
select an individual track. Choose
1/2
,
3/4
,
5/6
etc. to
select a pair of tracks. Choose
1-24
to select all tracks.
Dst. Trk
This sets the destination track or tracks
into which the selected section is inserted. What you
can select here depends on what you have selected
for the source track. If you have selected a single
track, you can select tracks
1
through
24
here. If you
have selected a pair of tracks (for instance,
1/2
), you
can only select track pairs here. If you have selected
all tracks (
1-24
), then
1-24
is the only option available
to you here.
Times
This is the number of times that the selected
section is inserted (end-to-end) in the destination
track or tracks. You can set this value from
1
to
99
.
Press
YES
to perform the operation or
NO
to leave
this screen.
OUT
IN
TO
OUT
IN
TO
OUT
IN
TO
OUT
IN
TO
Содержание Portastudio 2488
Страница 90: ...90 TASCAM 2488 User s Guide Notes...
Страница 91: ...10 Specifications etc TASCAM 2488 User s Guide 91...
