3 – Effects
34
TASCAM 2488
User’s Guide
Single effect
The single effect provides you with a quality effect in
the internal effect loop. This is most useful in the
mixdown and mastering stages, but it can be used at
any time.
The send level to this effect is controlled by the chan-
nels’
LOOP
levels (“Effect send” on page 23) and the
master
LOOP
level.
The return from this effect is sent to the stereo master
bus, or to the bounce sub mix (“Making a bounce
mix” on page 49).
Press the
SINGLE
EFFECT
key. It lights, and the
screen changes to the
SINGLE EFFECT
screen:
Press the
ENTER
key to enter the library screen to
recall a preset effect or a user effect or to save the
current parameters.
Use the “left” and “right” cursor keys to select the
PRESET
choices, the
USER
settings, or to
SAVE
the cur-
rent parameters.
Scroll up and down through the list that appears, and
press
ENTER
to confirm your choice.
Single effect library presets
The choices available from the
PRESET
library are
based on the following basic types, as shown in the
right column of the library screen:
REV
A reverb effect with different types and charac-
teristics. Adjust the
ROOM TYPE
,
PRE DELAY,
REV TIME
,
DIFFUSION
and
LEVEL
.
DLY
A flexible delay effect with different settings.
Adjust the
TYPE
,
PRE DELAY
,
FB DELAY
(feedback delay),
FEEDBACK
and
LEVEL
.
CHO
A warm-sounding chorus. Adjust the
RATE
,
DEPTH
,
FB DELAY
(feedback delay),
FEEDBACK
and
LEVEL
.
PIT
Pitch shifting with delay. Adjust the
PITCH
(in
semitones), the
FINE
pitch adjustment, the
PRE DELAY
,
the
FEEDBACK
and the
LEVEL
.
FLG
An expressive flanger. Adjust the
RATE
,
DEPTH
,
FB DELAY
(feedback delay),
FEEDBACK
and
LEVEL
.
PHA
A phasing effect. Adjust the
RATE
,
DEPTH
,
RESONANCE
,
STEP
and
LEVEL
.
GRV
Gated reverb. Adjust the
TYPE
, the gate
THRESHOLD
,
GATE TIME
,
DENSITY
(of the reverb) and
LEVEL
.
Once you have loaded a preset, you can adjust the
parameters to suit your project.
Saving your own settings
Like the mic and multi-effects, it is possible to save
and name your own single effect settings, either over-
writing an existing setting or adding a new setting.
In the library, no matter what name you give to an
effect (for example
HEAVY BASS
), the three-letter
abbreviation of the original preset that was edited to
create the user setting is always shown (for example
PHA
).
Содержание Portastudio 2488
Страница 90: ...90 TASCAM 2488 User s Guide Notes...
Страница 91: ...10 Specifications etc TASCAM 2488 User s Guide 91...
