Tascam DM-24 Скачать руководство пользователя страница 88 | Manualshive

Страница: 88 / 146

Tascam DM-24 Скачать руководство пользователя страница 88

11 – Machine Control/Location—DTRS devices

88

TASCAM DM-24 Reference Manual

Press the

EXT CTRL

key (

SHIFT

indicator should not

be lit) to bring up the main external control screen:

Initially, the list will be blank, but devices can be
added as described here.

Note that this list is unconnected with the lists of
machine and transport control devices described ear-
lier in this section and refers to specific control capa-
bilities of these devices, rather generic controls.

Move the cursor to the right column of the screen,
and use the dial to scroll through the list of supported
devices. When the desired device is highlighted,
press the on-screen

<ADD

button to add it to the main

list in the left part of the screen.

To obtain information on the selected device, press
the

INFO

button for a pop-up message describing the

connected device of the selected type.

As the device type is added to the external control
list, the ID and the communication type (as described
in “STATE” on page 81 and “ID” on page 81) are

also detected and displayed. The devices available
are:

Up to eight devices may be added in this way. If an
attempt is made to add more, a popup panel (

External

Control List Full

) appears. Press

ENTER

to dismiss this

message.

In the case of MIDI devices (controllers and faders),
the ID can be set to correspond to the MIDI channel
in the case of controllers (see “MIDI controllers” on
page 93), and the Control Change number in the case
of faders (see “MIDI faders” on page 93).

To delete a device from the active list, move the cur-
sor to the left part of the screen so that the dial scrolls
through the active list.

Turn the dial to highlight the device to be deleted,
move the cursor to the on-screen

DELETE

button, and

press

ENTER

.

To jump to the specific control screen for the selected
device, highlight the device so that the cursor is by
the

JUMP

button, and press

ENTER

.

Moving between screens

When an external screen is selected in this way, the
bottom of the screen shows two buttons, accessed
with soft keys 3 and 4.

These keys allow jumping between the different
pages of the devices selected for external control in
the main

EXTERNAL CONTROL

setup screen.

DTRS devices

Depending on the functionality of the DTRS unit
(DA-98HR, DA-78HR, DA-98, DA-88 or DA-38),

different options, such as track delay, dither setting,
etc. are available, allowing these menu operations to

DEVICE

Screen name

DA-98HR DTRS recorder (“DA-98HR”
on page 89)

DA-98HR

DA-78HR DTRS recorder (“DA-78HR”
on page 91)

DA-78HR

DA-98 DTRS recorder (“DA-98” on
page 91)

DA-98

DA-38 DTRS recorder (“DA-38” on
page 92)

DA-38

DA-88 DTRS recorder (“DA-88” on
page 92)

DA-88

Common MIDI Control Change
Parameters for a single MIDI channel
(“MIDI controllers” on page 93)

CONTROLLERS

Faders control a MIDI Control Change
parameter on 16 channels (“MIDI fad-
ers” on page 93)

MIDI FADERS

DA-98HR internal submixer control
(“DTRS mixer” on page 90)

DA-98HRMixer

«
...
86
87
88
89
90
...
»

Содержание DM-24



















































































































































Отзывы:

Нет отзывов