Tascam CD-D13, Руководство пользователя

Страница: 29 / 38

12.7 Update Firmware
TASCAM Tower CD Duplicator User’s Manual 21
12.7 Update Firmware
The
Update Firmware
function updates the firmware of the interface board via
compact disc (CD). The CD must contain the required data file and be inserted in
the source drive. The CD Duplicator will locate the data and update its firmware
automatically. During the update, do not turn off the power to the unit. The update
process is complete after the system resets automatically and displays the main
menu.
12.8 Compare Firmware
The
Compare Firmware
function compares the current firmware version in the
interface board to the update version in the disc.
12.9 H/W Diagnostic
The
H/W Diagnostic
function detects the devices connected to the interface board,
confirms functionality, and displays information about the hardware on the LCD.
12.10 Load Default
The
Load Default
function resets all settings to factory default values. It is
recommended that you reset to the default values if the CD Duplicator fails to
function properly after you make changes to the original configuration.
12.11 CD+G
The
CD+G
function enables or disables CD+G (karaoke CD) format support. The
default setting is
OFF
.
12.12 ISRC & MCN
The
ISRC & MCN
function enables or disables ISRC and MCN format support.
The default setting is
ON
.
12.13 CD-Text
The
CD-Text
function enables or disables the copying of CD-Text discs. The
default setting is
OFF
.
12.14 Switch USB Mode
The
Switch USB Mode
function is not applicable to either the CD-D13 or
CD-D17HD Tower CD Duplicators.
Note: The CD+G value must be set to OFF before you can use the Track
Extraction features.