Tascam CD-D13, Руководство пользователя

Страница: 28 / 38

12.3 Read Error Skip
20 TASCAM Tower CD Duplicator User’s Manual
12.3 Read Error Skip
The
Read Error Skip
setting controls error skipping during reading of the source
disc.
If the setting is
OFF
and an error is detected, the target drive stops and displays
the read error message.
If the setting is
ON
, no messages will be displayed if an error occurs. The copy
operation will be completed and the copy will include all errors detected during
the process.
The default setting is
OFF
.
12.4 Format HDD
(For factory use only; please do NOT use this function.)
The
Format HDD
option is valid only on the CD-D17HD Tower CD Duplicator,
which features a factory-installed hard disk drive. The factory-installed hard disk
drive has already been partitioned and formatted and is ready for use.
12.5 Verify HDD
(For factory use only; please do NOT use this function.)
The
Verify HDD
option is valid only on the CD-D17HD Tower CD Duplicator,
which features a factory-installed hard disk drive. The factory-installed hard disk
drive has already been partitioned and formatted and is ready for use.
12.6 Burn-in
The
Burn-in
function runs an emulate writer function continuously. The disc in the
target drive is ejected and re-inserted automatically between each test cycle. This
function can be prepared to run continuously or specified to run from 1 to 1000
times.
Warning! Do not run this function. It will erase all data already loaded into disk
partitions. This function is reserved for factory use only.
Warning! Do not run this function. It will erase all data already loaded into disk
partitions. This function is reserved for factory use only.