Tascam CD-A580, Руководство пользователя

Страница: 38 / 44

38
Cassette tape recorder
Cassette tape compartment does not close.
e
The cassette tape is not properly loaded . Reinsert it .
Sound quality is poor.
e
Clean the heads (page 39) .
Playback speed seems somewhat fast or slow.
e
Check the pitch control setting (page 25) .
Cannot record
e
If the erasure prevention tabs on top of the cassette are broken
off, cover the holes using pieces of adhesive tape .
e
Check the recording level setting (page 32) .
USB flash drive
No sound even if the USB Play (
t
) button is pressed.
e
Confirm that there are MP3 files on the USB flash drive .
e
File formats other than MP3 (e .g . MPEG 1 LAYER 2 file) cannot be
played .
Cannot record
e
Confirm that the USB flash drive has open space .
e
Confirm that the USB flash drive is not locked .
e
When record from an analog source, check the recording level
setting (page 29) .
e
Correct recording might not be possible depending on the USB
flash drive . If this occurs, change to a different USB flash drive . See
the TEAC Global Site (http://teac-global .com/) for information
about USB flash drives that our company has confirmed for
operation with this unit .
Recording to all USB flash drives using this unit is not guaranteed .
Troubleshooting (continued)
Monitored sound skips.
e
When recording from a CD to a USB flash drive, the monitored
sound might skip depending on the type of USB flash drive, but
this will not affect the recorded data .
MP3 files
Unknown characters are displayed on the display panel.
e
This unit cannot display double-byte symbols and characters
(such as Japanese and Chinese) correctly . MP3 file names must
only be alphanumeric characters to be shown properly .
“No title”, “No artist” or “No album” appears on the display.
e
ID3 tag information for the music file is missing . Edit the title,
artist and/or album information of the song on a PC using a
suitable application .
Since this device uses a microcontroller, external noise and
other interference can cause the unit to malfunction. If this
occurs, turn the power off and, after waiting for about one min-
ute, restart operation.
Beware of condensation
Condensation could occur if the unit is moved from a cold place
to a warm place, it is used immediately after a cold room has
been heated or it is otherwise exposed to a sudden temperature
change . To prevent this, or if this occurs, let the unit sit for one or
two hours at the new room temperature before using it .