Tascam CD-A580, Руководство пользователя

Страница: 3 / 44

3
Model for USA
This equipment has been tested and found to comply with the lim-
its for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or televi-
sion reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the equipment and/or the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Model for Europe
This product complies with the European
Directives request, and the other Commission
Regulations.
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to oper-
ate the equipment.
V
Precautions concerning batteries
Misuse of batteries could cause them to rupture or leak leading to fire,
injury or the staining of nearby things. Please read and observe the
following precautions carefully.
o
Be sure to insert the batteries with correct positive (
¥
) and nega-
tive (
^
) orientations.
o
Use batteries of the same type. Never use different types of batter-
ies together.
o
If the remote control is not used for a long time (more than a
month), remove the batteries to prevent them from leaking.
o
If the batteries leak, wipe away the leakage inside the battery com-
partment and replace the batteries with new ones.
o
Do not use batteries of types other than those specified. Do not
mix new batteries with old ones or use different types of batteries
together.
o
Do not heat or disassemble batteries. Never throw batteries into
fire or water.
o
Do not carry or store batteries with other metallic objects. The bat-
teries could short circuit, leak or explode.
o
Never recharge a battery unless it is confirmed to be a recharge-
able type.
Model for USA
This product has been designed and manufactured according to
FDA regulations “title 21, CFR, chapter 1, subchapter J, based on the
Radiation Control for Health and Safety Act of 1968”, and is classified
as class
!
laser product. There is not hazardous invisible laser radiation
during operation because invisible laser radiation emitted inside of
this product is completely confined in the protective housings.
The label required in this regulation is as follows:
For U.S.A.
RACK-MOUNTING THE UNIT
Use the supplied rackmount screw kit to mount the unit in a standard
19-inch rack, as shown in the illustration below.
Remove the feet of the unit before mounting.
ATTENTION
o
Leave 1U of space above the unit for ventilation.
o
Allow at least 10 cm (4 in) at the rear of the unit for ventilation.
Model for Canada
Industry Canada’s Compliance Statement:
This Class B digital apparatus complies with Canadian ICES-003.
CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST CONFORME À LA
NORME NMB-003 DU CANADA