Targus PA610U, Руководство по установке

Страница: 5 / 16

After approximately 10 seconds, your Pocket PC displays
the following message:
9 Tap OK.
The IP Address screen displays.
Use this screen to configure your network settings. To enter
the settings now, proceed to “Configure Network Settings,”
step 5.
To enter the network settings at any time, refer to
“Configure Network Settings,” step 1.
Configure Network Settings
You can change the network configuration at any time using the
IP address screen on your Pocket PC.
NOTE: Before configuring network settings, be sure the LP-E
card is connected to an active Ethernet connection and inserted
into your Pocket PC.
1 Tap Start, then Settings.
2 Tap the bottom Connections tab.
3 Tap the Network icon.
4 Select the Targus LP-E Driver on the Network Connections
screen.
3