Targetti Chroma-Cue, Руководство по установке

Страница: 10 / 15

Fixture setup
Though sometimes called “intelligent” lights, lighting fixtures
can not identify themselves to the controller.
Before first
use, and whenever changes are made to the lighting
installation, the controller must be configured with the
number and types of connected lights.
Configure the controller as follows.
1. If you have not already done so, install the
Chromatron software.
2. Start Chromatron .
3. Connect the CHROMA-CUE to any USB port on the
computer using the included USB cable.
Do not
connect the controller to the PC before the
software is installed.
4. Within a few seconds, the computer detects the
controller and asks whether you want to load data
from the device. Click
Yes .
5. The next prompt alerts you that loading data will
cause any unsaved changes to be lost. Click Yes to
continue.
10 CHROMA-CUE Installation Guide