TARGA TM-2100
English
0
Connecting Audio Devices
After you have unpacked your device and located it in a suitable position, you can con-
nect your audio devices. In the following figure you will find an example of which de
-
vices you can connect to the various jacks. The vast number of jacks however permits
so many connection possibilities that we are unable to go into detail on all the different
versions.
In the annex you will however find the allocation of the jacks as well as the possible
connectors with some examples of devices and cables that typically occupy such con-
nector plugs. You will find some practical examples of use in the annex.
You can find details of the available connector jacks in the "Jacks and Controls" section
on page 6.
Take special care when positioning the cables that nobody can trip over them. If you
want to place your mixing console on a table, you should carefully tie together all con-
nected cables to the table leg or similar (e.g. with sticky tape) to avoid that the device
falls down through being mechanically pulled onto one of the cables.
