Targa lupilu LBP 864 A1, Инструкция по эксплуатации и правила безопасности

Страница: 16 / 38

Lupilu LBP 864 A1
14 - English
4. Switch the night light (8) on or off as required. To do this, hold the night light button (12) down for
about 3 seconds.
The status of the night light is saved after the unit is switched off. So when it is switched on,
it stays on or off depending on whether it was switched on before.
5. Place or hang the parent receiver unit (A) somewhere near you. If you are moving around the
house, twist the handle (5) to the bottom and use it as a belt clip. This way you can always carry
the parent receiver unit (A) with you.
9. After use

After use, clean the baby monitor as described in the "Maintenance/cleaning" section below.

If you do not wish to use the baby monitor for an extended period, remove the rechargeable or
conventional batteries from the parent receiver unit (A) and the baby transmitter unit (B).

Keep the batteries away from children.

Store the baby monitor in a dry and dust-free place.

Also make sure that the storage temperature is maintained between 5 °C and 40 °C. Humidity
must not exceed 90% rel. humidity.
9.1 Maintenance/cleaning
DANGER! Before cleaning the power adapters, disconnect them from the mains power.
Otherwise, there is a risk of electric shock!
WARNING about property damage! Do not use solvents or aggressive liquids.
This could damage the device housing.
Only use a clean, dry cloth for cleaning the devices. Never use any corrosive liquids. If very dirty, wipe
the device with a damp cloth and let it dry.
Only use the baby monitor again when all components are completely dry.
10. Troubleshooting
If your baby monitor does not work as normal, follow the instructions below to try to solve the problem. If
working through the tips below does not fix the fault, please contact our hotline (see "Warranty
information" on page 16).
Risk of electric shock!
Never try to repair the device yourself.