3
For your own safety read following instructions carefully before attempting to connect this recorder to the mains.
Mains Supply: 230V ~ 50Hz - AC only
This unit is designed to operate on a
230V~50Hz
supply only. Connecting it to other power sources may damage it. Ensure that
the supply corresponds to the information on the rating label at the rear of the recorder.
This component system may be fitted with a non-rewireable plug. If it is necessary to change the fuse in a non-rewireable plug
the fuse cover must be refitted. If the fuse cover becomes lost or damaged, the plug must not be used until a replacement,
available from the manufacturer, is obtained. It is important that the colour of the replacement fuse cover corresponds with the
colour marking on the base of the plug.
If the plug needs to be changed because it is not suitable for your socket, or becomes damaged, it should be cut off and an
appropriate plug fitted following the wiring instructions below. The plug must then be disposed of safely, as insertion into a 13A
socket is likely to cause an electrical hazard.
IMPORTANT
This symbol means that this unit is double insulated. An earth connection is not required.
DANGER
LASER SAFETY
CAUTION : USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER
THAN SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK FAILED OR DEFEATED. AVOID DIRECT EXPOSURE TO BEAM
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service
CAUTION
To prevent electric shock, disconnect from the mains before removing cover.No user
serviceable parts inside. Refer servicing to qualified service personnel.
To achieve the utmost in enjoyment and performance, please read this manually carefully before attempting to operate the unit in
order to became familiar with its features, and assure you years of faithful, trouble free performance and listening pleasure.
Important Notes
n
Keep instructions the safety and operating instructions should be retained for future reference.
n
Avoid installing the unit in locations described below:
Exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
On top of other stereo equipment that radiate too much heat.
Places lacking ventilation or dusty places.
Places subject to constant vibration.
Humid or moist places.
n
Make sure not to obstruct the ventilation opening.
n
Operate turning controls and switches as instructed in the manual.
n
Before turning on the power for the first time, make certain the power cord is properly installed.
n
Store your DVDs in a cool area to avoid damage from heat.
For safety reasons, do not remove any covers or attempt to gain access to the inside of the product.
Refer any servicing to qualified personal.
Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing
to qualified service personal. ( Continued to next page )
Important Safeguards
